Sikafloor®-167 Primer
Epoxy based primer (Formerly FLORPRIME EP)
Sikafloor®-167 Primer is a 2-part, low viscosity, multipurpose epoxy resin which can be used as a primer for levelling mortar, under layer screed, self-smoothing topping.
Usage
Sikafloor®-167 Primer may only be used by experienced professionals.
- Primer for concrete substrates, cement screeds and epoxy mortars
- Primer for normal to strongly absorbent surfaces
- Primer for Sika® epoxy and polyurethane flooring systems
Packaging
Part A+B pre-batched 6 kg set
Part A 4 kg container
Part B 2 kg container
Advantages
- Low viscosity
- Good penetration
- Good bond strength
- Easy application
- Short waiting times
- Multi-purpose
- Compatible with subsequent epoxy and polyurethane top coats
Colour
Part A+B mixed Liquid, brownish-translucent
Part A (Resin) Liquid, brownish-transparent
Part B (Hardener) Liquid, transparent
Product Details
Composition
Epoxy
Shelf Life
12 months from date of production.
Storage Conditions
The product must be stored in original, unopened and undamaged sealed
packaging in dry conditions at temperatures between +10 °C and +30 °C.
Density
~1.0 kg/L (+27 °C)
pH-Value
≥ 6
Application
Mixing ratio
Part A : Part B = 2 : 1 (by weight)
Consumption
Consumption 0.20–0.30 kg/m2
Note: These figures are theoretical and do not allow for any additional material required due to surface porosity, surface profile, variations in level or wastage etc.
Ambient air temperature
+8 °C min. / +30 °C max
Relative air humidity
80 % max.
Dew point
Beware of condensation.
The substrate and uncured floor must be at least +3 °C above dew point to reduce the risk of condensation or blooming on the floor finish. Low temperatures and high humidity conditions increase the probability of blooming.
Substrate temperature
+8 °C min. / +30 °C max.
Substrate moisture content
≤ 4 % parts by weight
The following test methods can be used: Sika®-Tramex meter, CM-measurement or Oven-dry-method. No rising moisture according to ASTM (Polyethylene-sheet).
Pot Life
Temperature Pot life
+10 °C 50 minutes
+20 °C 40 minutes
+30 °C 30 minutes
Waiting time to overcoating
Before applying solvent free products on Sikafloor®-167 Primer allow:
Substrate temperature Minimum Maximum
+10 °C 24 h 4 d
+20 °C 12 h 2 d
+30 °C 8 h 1 d
Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity.