Sika® Form Oil
Emulsion based formwork release agent
Sika® Form Oil is a carefully blended combination of refined mineral oils and emulsifying agents, producing a thin film stable release agent for concrete
Sika® Form Oil provides the following properties:
- Good adhesion to the formwork
- Good concrete surface finish
- Reduces concrete contamination
Usage
Sika® Form Oil, when applied to:
- Steel
- Plastic
- Timber
Allows clean, fast and easy striking.
Packaging
25 and 200 litre drums.
Advantages
Sika® Form Oil provides the following properties:
- Good adhesion to the formwork
- Good concrete surface finish
- Reduces concrete contamination
- Non-flammable
Colour
Milky white liquid
SikaCim® is recommended for use in structural concrete, particularly for the following
Product Details
Chemical Base
Emulsified mineral oil
Shelf Life
12 months from date of production if stored properly
Storage Conditions
Stored in original unopened, undamaged, sealed packaging. Protect from frost, direct sunlight and contamination. Opened units should be stored closed.
Density
1,0 kg/litre
Application
Ambient Air Temperature
Min.5°C – Max.35°C
Equipment
Apply single coat by brush, roller, cloth or spray.
Consumption
- Timber approximately 20m2 per litre.
- Steel or plastic approx. 45m2 per litre
APPLICATION
- Shutter surface must be clean and free from dirt and cement laitance.
- Sika Form oil is supplied ready to use and requires no dilution.
- Mix contents of drum prior to use, to ensure a uniform application